WindowsFixes has moved to The Tech Corner! Redirecting...

You should be automatically redirected. If not, visit http://thetechcorner.net/ and update your bookmarks!

James Hartig's Personal Blog | TwitterTrend

If this site helped you, or you have a problem, leave a comment or email me! Also, don't hesitate to refer other people and put a link on your site.

Showing posts with label IE7. Show all posts
Showing posts with label IE7. Show all posts

Friday, May 30, 2008

Redirect Problem: “This page has an unspecified potential security risk. Would you like to continue?”

This is a redirect post for the following problem.

When trying to open a file, folder, etc. you get the following message from Internet Explorer...

“This page has an unspecified potential security risk. Would you like to continue?”





The solution on page...

Windows XP Problem: "Your current security settings do not allow this action"

should work, but if not, try

Windows XP zip Problem: "Your current security settings do not allow this action"


If that still will not fix your problem, then continue your search, or email me @


Hope That Helps!
-James Hartig

Tuesday, May 27, 2008

Something Gone Wrong? Something Not Working?

Have a Windows Problem that you cannot seem to fix?
Have a look in the Event Viewer!

To Access The Event Viewer

1) Goto Start -> Run
(if there is no Run command... do the following)
1a) Right-Click on the Start and select 'Properties'
1b) Next to the "Start Menu" selection click "Customize"
1c) Scroll Down and find "Run Command" and select the check box
1d) OK then Goto Start -> Run

2) Type in the Run Box, "eventvwr.msc" (no quotes)
2a) If Windows responds with a "Windows Needs Permission To Continue." and it is for "Microsoft Management Console", click 'Continue'
3) Typically you will find all of the major incidents in "System"
4) If you see a problem (indicated by a red X), Right-click and choose 'Properties'


Windows XP


Windows Vista


5) Take Note of the "Event ID:"
6) Copy some of the information in the description and then execute a Google search
note: be sure to include information like "windows xp event [event id goes here]" also, paste some of your information like the following example!

I will be showing a problem that I recently had and have produced a fix for...






With that information I would search on Google for
"windows xp event 4321 The name could not be registered on the Interface with IP address not allow the name to be claimed"
then looking through the results I would click on

Windows Fixes: Cannot connect to Windows network? Event 4321

Thats all!

Hope that helps
-James Hartig

If you couldn't find anything, email me the whole description, ID and maybe

Wednesday, January 23, 2008

[Not A Fix] Update Your DNS To A Faster/Better One [Not A Fix]

Note: This is classified as an enhancement and not a "fix".

DNS- {Domain Name System}, an Internet service that translates domain names into IP addresses.
For more information: http://www.howstuffworks.com/dns.htm

(Note: Pictures may look different on my pictures than what you are seeing because my internet is "bridged" between two connections, however I will provide the steps for a standard setup and try to provide relevant pictures)

--- Upgrading Your DNS Servers (Windows XP) ---
1) Open Control Panel > Network Connections or
Control Panel > Network and Internet Connections > Network Connection
2) Right click on the "active" Connection and choose Status
Should be like "Local Area Connection"



(Note: For some reason, on some systems, the status screen will not open? Try double-clicking on the connection or follow the instructions below...)

3) Goto the Support tab and click on Details...
(Picture Below)

-- Alternate Way To Status Screen --
1) Goto Start > Run > cmd
2) Run ipconfig /All
3) Look at the correct information under the device you tried to open the "status screen" for
(Picture Below)
-- End Alternate Way --

4) Whether you are looking at the cmd window, or the status window, write down the "DNS Servers"
(Note: The information in the following examples do not represent "your" data, they are plainly examples)

Status Window


CMD Window


5) Go back to the Network Connections screen
(Open Control Panel > Network Connections or
Control Panel > Network and Internet Connections > Network Connection)

6) Right-click on the network connection you just looked up and this time choose properties.

7) Select Internet Protocol (TCP/IP)



8) Click Properties
9) Choose "Use The Following DNS server addresses"
10) Click Advanced in the bottom right corner of the "Internet Protocol (TCP/IP) Properties" window
11) Goto the DNS tab,



12) In the Add window type in the following numbers... then click Add
a)208.67.222.222
b)208.67.220.220
c) (any "DNS Servers" you wrote down from step 4)
d) (any "DNS Servers" you wrote down from step 4)
e) etc.




13)After entering the DNS Servers, click Ok three times (until you get back to the Network Connections window)
14) Windows might run a reconfig, repair, etc.

---- Continue Below With Windows XP ----

--- Upgrading Your DNS Servers (Windows Vista) ---
1) Open Control Panel > Network and Internet > Network and Sharing Center
2) Under the "Network" Section, across from "Connection", press "View Status"




3) Click on Details...
(Picture Below)

4) Whether you are looking at the cmd window (yes, you can use the cmd config from above), or the status window, write down the boxed data (IP Address, Subnet Mask, Default Gateway, DNS Server(s))
(Note: The information in the following examples do not represent "your" data, they are plainly examples)

Status Window



5) Go back to the Connection Status Window and click "Properties"



6) Press "Continue" on the "Windows needs your permission to continue." window

7) Select 'Internet Protocol Version 4 (TCP/IPv4)'



8) Click Properties
9) Choose "Use The Following DNS server addresses"
10) Click Advanced in the bottom right corner of the "Internet Protocol (TCP/IP) Properties" window

11) Goto the DNS tab,





12) In the Add window type in the following numbers... then click Add
a)208.67.222.222
b)208.67.220.220
c) (any "DNS Servers" you wrote down from step 4)
d) (any "DNS Servers" you wrote down from step 4)
e) etc.




13)After entering the DNS Servers, click Ok three times (until you get back to the Network Connections window)
14) Wait while Windows reconfigures your connection...

---- Continue Point For XP and Vista ----

15) Once Windows is done, open up your internet browser (Internet Explorer, Firefox, Opera, Netscape, AOL, Safari) and navigate to http://www.opendns.com/
a) If you see, under the top orange bar,

"You're using OpenDNS. Thanks! You are now navigating the Internet safer, faster, smarter and more reliably than ever before."

then you are all set!
b) if you do not (try a restart), then continue...

16) Make sure you entered your information correctly. If you think you have, then try right-clicking on your "connection" in the Network Connections window and choose repair.
17) Are all of the other websites working (google, yahoo, etc.)?
If so, then it might be because your router's DNS Servers are not set to OpenDNS, look at your router's instructions for help with that.
18) Make sure on the "Status" screen or the cmd window, that it shows
208.67.222.222
208.67.220.220
under your DNS Servers.

Hope That Helps!
-James Hartig

Thursday, January 3, 2008

Windows XP Problem: "Your current security settings do not allow this action"

Fix For "Your current security settings do not allow this action" when working with Networked Files.

When trying to Copy or Drag & Drop Or Transfer files from network share to Local computer.

Common on Windows XP SP3 with IE7 Updates

This problem has been fixed by Microsoft and only showed up if you were testing a pre-release version of SP3.

Get this error...
"Your current security settings do not allow this action"


Your current security settings do not allow this action

or
"This page has an unspecified potential security risk. Would you like to continue?"

This page has an unspecified potential security risk. Would you like to continue?

when trying to copy/open a network file/folder to your local computer.

Possible fix:

----Check to see if its a Windows Problem...----
(not required, unless the fix below doesn't work, then comment with the results from both)
1) Get the path to the Network Share File In Explorer
2) Start -> Run -> cmd
3) Type in...
XCOPY "" "C:\" /V
Note: After typing XCOPY " drag and drop the file into the cmd window and it will paste the path for you, then remember to close with " then type "C:\" [with quotes] and then /V

if you get a successful notice then continue to next section
if not then this may not be the right site for you and I would look into the permissions on C:\ and on the network share...
1) Open My Computer
2) Tools -> Folder Options -> View
3) Uncheck Last option, "Use Simple File Sharing"
4) Access your network share in Explorer by either \\ or \\
5) Open the correct share, Select all folders and right click, choose Properties
6) Goto the security setting...
7) Check all users, if any users have deny boxes checked (not allow, deny!) uncheck them and try again to copy the file
8) If still unsuccessful, it might be the shared folder computer or many other things, a google search should help more, sorry


----Actual Fix For This Problem!----
--Windows XP and Newer--
1) Open "Internet Explorer 7"
1a) if you have IE6 then this fix will not work/possible please try another site
(If you have Windows 2003/2000 or below, this issue should not be affecting you, however, if it is then please skip down to the next section)
2) Tools -> Internet Options
3) Goto the "Security" tab
4) Change Internet & Local Interact Zones To Default if the "Default Level" option is possible
5) Goto "Local Interact" section
6) Choose Sites
Box Should Look Like



Change to...


7) Click Ok
8) Click Ok Again
9) Close IE7
10) Try to transfer file again...

--Windows 2003/2000 And Below--
(Thanks to Raja)
This is for people that have IE7 on a Windows 2003/2000 or below version.
1) Open "Internet Explorer 7"
1a) if you have IE6 then this fix will not work/possible please try another site
2) Tools -> Internet Options
3) Goto the "Security" tab
4) Goto "Internet Zone" section
5) Then click on "Custom Level"
6) Scroll down to "Miscellaneous" and find the option, "Launching Applications and Unsafe Files"
7) Change that setting to 'Prompt'
8) Click Ok
9) Click Ok Again
10) Close IE7
11) Try to transfer file again...


If it works congrats, please post a comment
If it doesn't work, please post a comment with new or same error, Windows Version and IE7 version, etc.

Hope that helps!

-James Hartig